• 🔍 Like our community? You can tell Google to show you results from this site more often. Just Click Here and then click the empty checkbox on the right side of our name.

Which Transfer Case Motor?

As an Amazon Associate we earn from qualifying purchases.
View on Social Feed
C

Crazybt

New member
Joined
Apr 23, 2014
Messages
14
Reaction score
0
Points
0
I have a 1998 Chevy Blazer LS 4dr 4x4 with a 3 button switch. (2hi, 4hi, 4lo)

I replaced the vacuum switch, vacuum lines, tccm (blue connector) and still no luck so the only thing left is the transfer case motor.

Which one do I need, would it be the 2 terminal or 7 terminal plugs?
 
you have seen this video or similar and know that the cable is being moved by the vacuum actuator?
https://www.youtube.com/watch?v=IP0jhBG0jv4
unless I'm misunderstanding your question shouldnt you be able to see the plug from under the vehicles to determine which type you need?
 
Never mind about the Transfer Case motor, I jacked the blazer up and turned the driver side front wheel backwards and the forward and then pressed 2-hi and she went in.

I guess that leads me to the differential cable am I right? its a NP1 transfer case I believe.

How difficult is the process to change the cable? and should I change the actuator along with it?.
 

Share this page

Back
Top