Where is the air bleed valve for the cooling system on a 95 Camaro?

[...]

Its a base v6 3.4. Thanks.

 

[Michael S]

Make sure you do have an air bleed.
Look at the radiator and if it has a cap, there is where you bleed it.
If no cap then look on the engine directly under the coolant reservoir.

 

[Andrew Robbins]

for the most part GM uses bleeder screws. Air bubbles rise to the top so it going to be the highest point in the cooling system. I had a grand am with a 3400 and it was on the front left side looking at the engine.

 

[bandit_60]

all you have to do is leave the cap off and start your car so the air bubbles will escape.