I can't find my ground wire on a 2006 chevy cobalt?

[Aaron]

I'm trying to do some electrial wiring to my 2006 chevy cobalt and cannot find my ground wire. Does anyone know if they have one? or what I need to do?

 

[fiero86]

Just find a screw or bolt and make sure there isn't any paint under it and screw/bolt down the wire that you need to ground. If you are doing wiring where there aren't any bolts around you can find part of the body/floor that is out of the way and scrape of the paint and use a self tapping metal screw, just make sure there isn't anything important under it.

 

[Chip]

Any point where metal meets metal will provide a sufficient ground.


I suggest a bolt.

Just make sure there is no paint or anything on it.

 

[GibsonEssGee]

Connect your ground wire to the chassis.

 

[jsemkralfootball]

have a pit bull sniff it out

 

[DANJA]

Buy a brand new metal bolt and remove a bolt anywhere there is a factory bolt and metal, scratch away the paint, but just in bolt area (sand is best!), ground ( keep wire short) and replace with new metal bolt! if you want an easier way, try grounding studs on ebay

http://cgi.ebay.com/ebaymotors/Black-Power-Distribution-Block-Dual-1-4-Studs_W0QQitemZ330306622234QQcmdZViewItemQQptZMotors_Car_Truck_Parts_Accessories?hash=item4ce7cf131a&_trksid=p4506.m20.l1116