Climate control module

Deacon

New member
Joined
Jun 8, 2022
Messages
4
Reaction score
0
Points
1
Got a question I got this 04 Chevy Silverado that I like real well the climate control module was messing up I bought a new one went by the instructions to recalibrate does everything well except on dual climate control if you want the same temperature for both sides it doesn't show the arrows for both sides it just shows one and when you go into it if you have 68 on one side it might be 67 showing on the other side somebody help me out
 
Assuming it is the correct module it would require running diagnostics with a Tech 2 or similar software device.
 
Assuming it is the correct module it would require running diagnostics with a Tech 2 or similar software device.
Good morning according to Napa Auto parts it is the correct module
 
Good morning according to Napa Auto parts it is the correct module
Did you go to the NAPA site and confirm you received the correct part?
 
Then as I mentioned you need a diagnostic scan tool
Good evening what wouldthe diagnostic scan provide , so recalibrating the the blend doors is not enough, because all that works fine it's just that one arrow on the on the screen as far as temperature wise I can still set both of them at 70° but it will only be one arrow whether it be the driver side or the left side
 
Back
Top