1999 Chevy Suburban 5.7 V8

[s23986136]

Does anyone know of a list with all the tools needed to service a 1999 Suburban?

 

[zora]

i really cannt recall a list of all tools necessary to service any vehicle. Are you referring to specialty tools or just the size of nuts and bolts?

Engine Compartment

Battery

Battery Terminal Bolt - 5/16"
Battery Hold Down Bolt - 1/2"

Motor

Negative Battery Cable Terminal and ECM Motor Ground Terminal and Rear Tensioner Brace Bolt (Located in front of thermostat housing) - 9/16"
Rear Tensioner Braces - 9/16"
Alternator Positive Cable Stud - 10 mm
Brake Booster Line to TBI Unit - 3/4" & 5/8"
Intake Manifiold Mounting Bolts - 9/16"
Heater Core to Manifold Pipe Fitting - 1 1/16"
Distributor Hold Down Bolt - 9/16"
Distributor Cap - 1/4" or Phillips Head Screwdriver
Ignition Coil Mounting Bolts - 1/2"
Fuel Line Bracket on Left Rear Head - 1/2"
Fuel Lines to TBI Unit - 3/4" & 5/8"
Crusie Control/Throttle Cable/Trans Cable Bracket - 9/16" & 1/2"
Center Bolt Valve Cover Bolts - 10 mm
Thermostat Housing Bolts - 9/16"
Water Pump Bolts - 9/16"
Fan Shroud Bolts - 10 mm
Tensioner Pulley Nut - 5/8"
Clutch Fan Nuts - 1/2"

Exterior

"Paddle" , "Big Guy" or "Dumbo" Mirrors

Outer Cover - T-20 Torx
Adjustment Bolts - 10 mm

Drivetrain

Front Suspension

10 Bolt Axle Cover Bolts - 1/2"
10 Bolt Axle Fill Plug - 11/16"

Rear Suspension

Rear Shock Upper Mount - 11/16"
Rear Shock Lower Mount - 7/8" & 13/16"
10 Bolt Axle Cover Bolts - 1/2"
10 Bolt Axle Fill Plug - 3/8" Square Drive

Transfer Case

Fill/Drain Plugs - NP241C Transfer Case - 1 3/8" or 1 3/16"

 

[s23986136]

This is what I wanted. Thanks so much