B bogdanov New member Joined Aug 21, 2009 Messages 1 Reaction score 0 Points 0 Aug 21, 2009 #1 on a bolt but..? there is paint on the place i bolted it to how i sand that off somehow or does it not matter
on a bolt but..? there is paint on the place i bolted it to how i sand that off somehow or does it not matter
D don r New member Joined Nov 15, 2008 Messages 45 Reaction score 0 Points 0 Aug 21, 2009 #2 It'll connect where the bolt goes through the sheet metal. You can sand it on the face if you want a bigger contact point. Seal it with a spot of paint or RTV to keep it from getting rusty there.
It'll connect where the bolt goes through the sheet metal. You can sand it on the face if you want a bigger contact point. Seal it with a spot of paint or RTV to keep it from getting rusty there.
M Matt's wife New member Joined Aug 21, 2009 Messages 1 Reaction score 0 Points 0 Aug 21, 2009 #3 I would sand it off. gotta be sure its a good ground. or you will start popping fuses
M mtparker18 New member Joined Aug 22, 2009 Messages 1 Reaction score 0 Points 0 Aug 22, 2009 #4 I'd look for a good place to bolt it to. such as a seatbelt bolt.
