PDA

View Full Version : 1988 Chevy S10 No Spark, Why?


chrissandefur2003
05-09-2009, 05:43 PM
Had to replace the head gasket, never touched anything except the plug wires, now there is no spark at all on any wire ends.

Suggestions?
2.5 4cly engine.
Dist cap is under the intake manifold.
No coil pack
Every thing is clean and snug. Fittings are snug and clean, used the spray stuff to make the connections "work" properly.

alwcurlz
05-09-2009, 05:51 PM
Check the power wires that run to the coil pack and make sure your connector there is properly fitted.

mike p
05-09-2009, 05:59 PM
Check for spark at the distributor cap. If there's no spark there check the coil.