skinnywayne
11-11-2008, 12:34 PM
I have had this problem with my power window for along time now. The window goes down fine with no problems, but when you go to put the window up the window moves up maybe 1/4 of an inch then stops. You must then wait about 3 mins to try again and usually it will go up another 1/4 of an inch. If you dont wait the 3-5 mins the window will do nothing when you press the button. So I decided to take the door apart. I unplugged the power cord to the window motor, and then removed the white piece that it was attached to. When I removed this the motor brushes' fell out and so did the springs. I managed to find them lol. I noticed that there was lots of gresee all over the brushes and the motor armature. I cleaned the gresee and inspected the brushes but they dont seemed to be very worn. Now The biggest problem I have now I finding a way to get the brushes to stay on the springs and get them pushes back enough to get them back in place (seems impossible). Could this be the cause of my problem?